Setting Basic System Information - RADVision Scopia XT5000 Administrator's Manual

Access the quick setup wizard from the endpoint or web interface, as described in
Setup Procedure
Procedure
1. Set the Use Gatekeeper list to Yes.
2. Set the Mode list to Manual.
3. Enter the IP address of the gatekeeper in the Gatekeeper IP address field.
4. Enter the H.323 number required to dial the XT Codec Unit in the E.164 field.
5. Select Done.

Setting Basic System Information

Set the system's basic information, such as the correct local time and date. We recommend modifying
the default administrator PIN to prevent users from modifying advanced settings. For more information,
see the following topics:
Administrator Guide for Scopia XT5000 Endpoint with Embedded
Server for IP Office Version 3.2
on page 45.
Important:
If the gatekeeper is configured to be automatically detected by endpoints, select
Automatic (depends on the type of gatekeeper). Consult the network administrator.
The basic configuration of your Scopia XT Endpoint for IP Office is complete.
Figure 23: Gatekeeper settings
Accessing the Quick
Initial Configuration | 52