Resolving IP Address Problems
Problem
Solution
Note
If the GLAN2 port is enabled and in use, check that it is properly connected.
Solution
RADVISION | Administrator Guide for SCOPIA XT4000 Series Version 3.0
Cannot configure the IP address.
If the icon for no network connection
assigned IP address, the system is not connected to network. Make sure the GLAN cable is
connected properly at both ends: to the network socket and to the GLAN1 port of the XT
Codec Unit, as shown in
Redefine the IP address:
1.
From the Main menu, select Configure.
2.
Press Next several times until the Configure TCP/IP screen appears.
appears and the system displays 0.0.0.0 as its
Figure 3-7 on page
32.
Figure 3-7
GLAN1 port
Troubleshooting | 32