RADVision Scopia XT5000 Administrator's Manual page 41

Remotely Enabling the License from the Web Interface
About this task
This procedure describes how to enable the software license of an XT Codec Unit remotely via the web
interface. You can also enable the license from the endpoint's interface, as described in
License from the Scopia XT Endpoint for IP Office
If you do not yet have your license key, you can set up the system in demo mode for a period of 24
hours. After this time, you must enable your license key to use the system.
Before you begin
Obtain a license key for the Scopia XT Endpoint for IP Office as described in
Endpoint for IP Office to Obtain a License Key
extend Scopia XT Endpoint for IP Office functionality, see
System Functionality
Procedure
1. Access the XT Endpoint web interface, as described in
2. From the Home page, select Enable License, or, navigate to Administrator Settings >
Administrator Guide for Scopia XT5000 Endpoint with Embedded
Server for IP Office Version 3.2
on page 39.
Interface on page 24.
Utilities > Licenses.
on page 43.
on page 38 or, if you are enabling a license option to
Installing and Enabling Licenses which Extend
Accessing XT Endpoint Web
Enabling the
Registering the Scopia XT
Initial Configuration | 41