Modifying The System's Name On The Titlebar - RADVision Scopia XT5000 Administrator's Manual

2. Enter the name of the XT Endpoint in the System Name field.
3. Select the required language from the Language list.
4. From the web interface only, select Save.

Modifying the System's Name on the Titlebar

About this task
This procedure describes how to configure the endpoint to use an alternate system name, such as the
SIP username, on the titlebar
can also do this as part of the quick setup from the endpoint itself, as described in
Name and Language
The name displayed on the monitors participating in the videoconference (for example: John-Smith, or
9th-Floor-Room, or NY-Office) is based on the protocol of the call. If you are connecting over SIP, your
system's SIP username is used, while if you are connecting over H.323, your system's H.323 name is
used. For more information, see
the Scopia XT Endpoint for IP Office with a Gatekeeper
Administrator Guide for Scopia XT5000 Endpoint with Embedded
Server for IP Office Version 3.2
Figure 24: Basic Settings page
(Figure 25: Scopia XT Endpoint for IP Office's titlebar
on page 46.
Registering the XT Endpoint to IP Office
Setting the System
on page 61 and
on page 89.
on page 55). You
Registering
Initial Configuration | 54