RADVision Scopia XT5000 Administrator's Manual page 76

Before you begin
Connect the analog audio equipment as described in Installation Guide for Scopia XT Endpoint for IP
Office .
If configuring from the endpoint, you must first enable advanced configuration, as described in
Maintaining the XT Endpoint Locally from the Endpoint
Procedure
1. Access the Microphone Pod settings:
2. Set the fields as required.
Administrator Guide for Scopia XT5000 Endpoint with Embedded
Server for IP Office Version 3.2
Figure 37: The analog/optical audio port on the XT Endpoint
• From the endpoint's main menu, select Configure > Advanced > I/O connections >
Audio - Input > Analog.
• From the XT Endpoint web interface, select Administrator settings > I/O
connections > Audio - Input > Analog.
Table 22: Configuring analog audio connections
Field Name
Enabled Enables/disables this audio input.
Gain Set the voice signal to the desired level by using the slider.
Echo canceller Enable the echo canceller when working with an external microphone
system that does not contain echo cancellation.
To configure the echo cancellation settings, see
Canceller
To hear the audio also locally, see
page 79.
Disable this setting if you have an external mixer that handles its own
echo cancellation or you are connecting to a computer.
Audio selection Choose one of these settings:
• Analog associated with DVI - Select this option when a PC is
• Analog always - The audio coming from analog connection is
on page 35.
Description
on page 77.
connected to the XT Codec Unit's DVI-I Input port and you want
to hear the PC's audio only when you selected the DVI video
input as your main video source or as the presentation.
always sent to remote participants, regardless of which video is
selected.
Configuring the Echo
Configuring Audio Outputs
Initial Configuration | 76
on