Connect To The Ip Network; Run The Setup Wizard - RADVision SCOPIA 100 MCU Quick Start Manual

C
ONNECT TO THE
IP N
ETWORK
C
ONFIGURE THE
MCU
R S
UN THE ETUP
W
IZARD
Use the supplied LAN cable to connect the Ethernet IP network
port on the front panel of the MCU to a 100Base-T IP network
connection on your network switch.
Once you have assigned an IP address to the MCU, you can use
the web interface to configure the MCU using the Setup Wizard.
Procedure
1. In your web browser, type the IP address of the
MCU.
For example: http://123.221.23.44
Press Enter to display the Login screen.
2. Click the Sign In button to display the Name and
Password fields.
3. Type the administrator user name and password in
the Name and Password fields and click Go.
Note The default name is admin and the password is
null. It is recommended that you change these settings
for security reasons. For more information, see
the Default Administrator Password
4. The configuration interface displays and
automatically launches the Setup Wizard.
The MCU Setup Wizard allows you to configure addressing for
the MCU IP, H.323 gatekeeper and SIP proxy and enables you to
set the MCU to the regional date and time settings of the device
on which you are managing the MCU.
The Setup Wizard runs automatically the first time you access the
MCU and can be accessed anytime subsequently by selecting
the Setup Wizard button in the horizontal toolbar of the Device
interface.
Change
on page 11.

Connect to the IP Network 9