RADVision Scopia XT5000 Administrator's Manual page 138

Improving Call Video Resolution
Problem
Solution
Solution
Solution
Administrator Guide for Scopia XT5000 Endpoint with Embedded
Server for IP Office Version 3.2
Option
Bottom
Right
4. From the web interface only, select Save.
My call does not perform at 1080p, even though the camera is capable of 1080p and 1080p
is enabled on the Scopia XT Endpoint for IP Office.
Make sure the remote system also supports 1080p. Remote systems that are limited to 720p
or less negotiate lower resolutions with the Scopia XT Endpoint for IP Office.
Make sure the camera is connected to the HD CAM1 input port of the XT Codec Unit.
Make sure the Moving setting is enabled as described below.
If configuring from the endpoint, you must first enable advanced configuration, as described
in Maintaining the XT Endpoint Locally from the Endpoint
1. Access the general camera settings by doing one of the following:
• From the endpoint's Main menu, select Configure > Advanced > I/O connections
> Cameras > HD1.
• From the Scopia XT Endpoint for IP Office web interface, select Administrator
Settings > I/O connections > Cameras > HD1.
Description
wizard as described in Adjusting the Image
Position on page 48.
on page 35.
Troubleshooting the Scopia XT Endpoint for IP Office | 138