You can do this procedure from the endpoint itself or from the XT Endpoint web interface.
Important:
The system serial number also appears on the label at the back of the XT Codec Unit.
Procedure
1. View system information as follows:
2. To view additional system information such as IP addresses and the gatekeeper's
Administrator Guide for Scopia XT5000 Endpoint with Embedded
Server for IP Office Version 3.2
• From the XT Endpoint web interface, log in. The system information is displayed in the
Home tab.
• From the endpoint's main menu, select Configure > About using the XT Remote
Control Unit.
Important:
If your system is currently in a call, press ok/menu and select Stats > Configure >
About.
Figure 76: Viewing system information
registration status from the endpoint, press the
Back key and select System Status.
Troubleshooting the Scopia XT Endpoint for IP Office | 130