RADVision Scopia XT5000 Administrator's Manual page 80

Procedure
1. Access the audio output settings as follows:
2. Set the fields as required.
Administrator Guide for Scopia XT5000 Endpoint with Embedded
Server for IP Office Version 3.2
• From the endpoint's main menu, select Configure > Advanced > I/O connections >
Audio - Outputs > General.
• From the XT Endpoint web interface, select Administrator settings > I/O
connections > Audio - Outputs > General.
Figure 39: Defining the routing of the audio outputs
Table 24: Configuring audio output settings
Field Name
Digital Audio to output
Echo Cancelled inputs to output
Description
If enabled, it routes the digital audio input port to
one or more of the system's audio output
channels: HD1, digital audio and digital analog or
all of the above.
This setting is disabled by default, to avoid echo
effects and feedback loops when a monitor
speaker is used.
If enabled, sends the echo cancelled input from
the microphones to one of the system's audio
output channels: HD1, digital audio or analog
output.
Initial Configuration | 80