RADVision Scopia XT5000 Administrator's Manual page 91

3. From the web interface only, select Save.
4. Select Gatekeeper under H.323.
5. Set the fields as described in
Administrator Guide for Scopia XT5000 Endpoint with Embedded
Server for IP Office Version 3.2
Table 29: Configuring H.323 settings
Field Name
H.323 Name
E.164
Refuse calls by IP
Address
Figure 46: Configuring the Gatekeeper settings from the web interface
Description
The H.323 name or ID (alias) used to register the unit with the
gatekeeper.
When connecting over H.323, this name is displayed on the
monitors participating in the videoconference (for example:
John-Smith, or 9th-Floor-Room, or NY-Office).
The E.164 number used to register the unit with the
gatekeeper.
Select Yes to allow only endpoints registered to the
gatekeeper to call your endpoint.
Table 30: Configuring the gatekeeper on page 92.
Initial Configuration | 91