3. From the web interface only, select Save.
4. (Optional) If you are securing SIP connections using TLS certificates, continue with
Configuring Video Connections
There are a number of settings which affect the way the camera accepts input and the way the monitors
display video.
Navigation
•
Configuring the Camera Connection
•
Setting up the Monitor Display Modes
Configuring the Camera Connection
About this task
You configure the connection depending on the type of camera and its functionality. This includes
configuring the Scopia XT Camera Switch. You can do this procedure from the endpoint itself or from the
XT Endpoint web interface.
Before you begin
If configuring from the endpoint, you must first enable advanced configuration, as described in
Maintaining the XT Endpoint Locally from the Endpoint
Connect the video equipment, as described in Installation Guide for Scopia XT Endpoint for IP Office.
Procedure
1. Access the camera settings as follows:
Administrator Guide for Scopia XT5000 Endpoint with Embedded
Server for IP Office Version 3.2
Parameter
Use SIP Registrar
Registrar DNS Name
Use SIP Proxy
Proxy DNS Name
Proxy Model
Connections to the XT Endpoint Using TLS
• From the endpoint's main menu, select Configure > Advanced > I/O connections >
Cameras > General.
Select Yes.
Enter the DNS name or IP address of the IP Office
server.
Select Yes.
Enter the DNS name or IP address of the IP Office
server.
Select Auto.
on page 100.
on page 64
on page 68
on page 35.
Description
Securing
Initial Configuration | 64