RADVision Scopia XT5000 Administrator's Manual page 8

Table 1: Physical device specifications
System power requirements
Maximum power consumption
Operating temperature
Relative humidity
Storage temperature
Physical dimensions and Net Weight
Camera
Physical dimensions and Net weight
Microphone Pod
Physical dimensions and Net weight
Microphone Pod capabilities
Table 2: Video, audio and control capabilities
requirements.
Table 2: Video, audio and control capabilities
Signaling protocols
Video codecs
Dual video
HDMI input formats
Administrator Guide for Scopia XT5000 Endpoint with Embedded
Server for IP Office Version 3.2
100-240 VAC, 50/60 Hz, 1.8 A Max. for XT Codec
100W, AC input 115VA (341 BTU/hr) at 40°C
-40°C to 70°C (-40°F to 158°F), ambient
Height: 49.5cm (19.5"), Width: 54cm (21.5"); Depth
Height: 15.2cm (6.0"), Width: 25cm (9.8"); Depth
Diameter: 14cm (5.5"), Weight: 0.3 kg (0.7 lb)
Frequency response: 50 – 22,000 Hz
on page 8 lists the protocols and software
Scopia XT Endpoint for IP Office
H.323, SIP, ISDN (in conjunction with Scopia Gateway)
H.263, H.263+, H.263++,H.264, H.264 SVC, H.264 High Profile, H.264
High Profile SVC
H.239 (H.323); BFCP (SIP)
1920 x 1080 @ 25, 30, 50, 60fps (optional)
1280 x 720 @ 25, 30, 50, 60fps
720 x 576 @ 50fps
720 x 480 @ 60fps
640 x 480 @ 60fps
Scopia XT Endpoint for IP Office
Unit and AC direct for the monitor
0°C to 40°C (32°F to 104°F)
5% to 90% non-condensing
25cm (9.9")
Weight: 10 kg (22.1 lb)
13.5cm (5.3")
Weight: 1.6 kg (3.5 lb)
3-way Microphone Pod:
360º range
Up to 2 cascaded pods
About the Scopia XT Endpoint for IP Office | 8