Performing Basic Configuration - RADVision Scopia XT5000 Administrator's Manual

Before you begin
• Obtain a license key for the Scopia XT Endpoint for IP Office as described in
Scopia XT Endpoint for IP Office to Obtain a License Key
license option to extend Scopia XT Endpoint for IP Office functionality, see
Licenses which Extend System Functionality
• If configuring from the endpoint, you must first enable advanced configuration, as described in
Maintaining the XT Endpoint Locally from the Endpoint
Procedure
1. Access the Scopia XT Endpoint for IP Office's Main menu.
2. Select Configure > Advanced > Utilities > Licenses.
3. Enter the license key you received when registering the product. You can also enter license
4. Select Activate Licenses.

Performing Basic Configuration

Before you perform basic configuration for the XT Endpoint, your system administrator should install and
activate your XT Endpoint (for details, see the Quick Setup Guide for Scopia XT Endpoint for IP Office,
Administrator Guide for Scopia XT5000 Endpoint with Embedded
Server for IP Office Version 3.2
The Licenses screen appears, displaying the serial number (10-digit string) and user code.
The user code corresponds to the system MAC address. These fields are not editable.
Important:
The serial number is also printed on a label affixed at the back of the XT Codec Unit.
keys for optional features.
The license is automatically enabled.
on page 38 or, if you are enabling a
on page 39.
on page 35.
Figure 17: Activating a license
Registering the
Installing and Enabling
Initial Configuration | 44