Accessing The Quick Setup Procedure - RADVision Scopia XT5000 Administrator's Manual

the Installation Guide for Scopia XT Endpoint for IP Office, and Safety Instructions leaflet for Scopia XT
Endpoint for IP Office.
To start using your XT Endpoint, first define basic settings, such as the system's name, language, and
network settings. This is relevant for both new installations, and also after restoring default settings and
re-installing software.
Important:
Your system administrator might already have set these parameters for you and customized certain
features described in this guide to suit the environment of your company. If your administrator set up
PIN protection, you need the PIN number before continuing with the configuration.
You can define these settings as follows:
• Following the quick setup procedure on the XT Endpoint endpoint.
We recommend this method to quickly start using your XT Endpoint, since the quick setup wizard
includes only the basic required settings.
• Remotely defining the settings from the XT Endpoint web interface (see
Web Interface
Your administrator may define some settings remotely, such as for the network or gatekeeper (see
Configuring Network Settings
interface if you have not already completed the procedure from the endpoint.
You cannot remotely set the image on the monitor; this must be done from the endpoint itself.
Navigation
•

Accessing the Quick Setup Procedure

•
Setting Basic System Information
Accessing the Quick Setup Procedure
About this task
Access the quick setup procedure to define basic settings for your Scopia XT Endpoint for IP Office,
such as the system's name, language, and network settings. Follow the tasks of the quick setup
procedure in the order they are presented.
This is relevant for both new installations, and also after restoring default settings and re-installing
software.
You can do this procedure from the endpoint itself or from the XT Endpoint web interface.
Before you begin
Your system administrator might already have set these parameters for you and customized certain
features described in this guide to suit the environment of your company. If your administrator set up PIN
protection, you need the PIN number before continuing with the configuration.
Procedure
1. The quick setup wizard automatically appears the first time you access the Scopia XT
Administrator Guide for Scopia XT5000 Endpoint with Embedded
Server for IP Office Version 3.2
on page 24).
on page 81 for details). The quick setup is available from the web
Endpoint for IP Office, either by turning on the XT Codec Unit or logging in to the web
interface.
on page 45
on page 52
Accessing XT Endpoint
Initial Configuration | 45