Saving A Camera Position From The Web Interface - RADVision Scopia XT5000 Administrator's Manual

Saving a Camera Position from the Web Interface

About this task
You can change the camera position before or during a call and save that position for later use as one of
several presets.
This procedure describes how to position your local camera, and store dozens of camera positions from
the web interface. You can store up to 10 positions from the endpoint interface, as described in
Camera Position
Important:
You can control another Scopia XT Endpoint for IP Office endpoint's camera when connected to it, as
long as it is configured to be remotely managed.
Procedure
1. Access the XT Endpoint web interface, as described in
2. Select More Actions > Camera Control.
Administrator Guide for Scopia XT5000 Endpoint with Embedded
Server for IP Office Version 3.2
Figure 68: Camera position stored successfully
on page 116.
Interface on page 24.
Accessing XT Endpoint Web
Maintaining the Scopia XT Endpoint for IP Office | 118
Saving a