RADVision Scopia XT5000 Administrator's Manual page 50

Procedure
1. Press ok/menu and select one of the following from the IP Address Mode list:
2. If you selected Manual, configure the following, as instructed by the system administrator:
Administrator Guide for Scopia XT5000 Endpoint with Embedded
Server for IP Office Version 3.2
• Automatic: (Default) Select this option if the system gets its IP address automatically
(using DCHP).
The IP address, Subnet mask, Gateway, and DNS fields appear as read-only. See
Table 11: Configuring IP addresses
• Manual: Select this option if you require a static IP address. This is required, for
example, if the XT Endpoint is connected directly to the Internet, without any address
translation, or when other external endpoints need to dial to this endpoint as an MCU.
Enter the fields as described in
To secure SIP connections using TLS certificates, your system must have a static IP
address, since the system generates the certificate request using its IP address as the
Common Name (CN). For more information, see
Endpoint Using TLS on page 100.
Figure 22: Defining IP Settings
on page 51 for a description of these fields.
Table 11: Configuring IP addresses
Securing Connections to the XT
on page 51.
Initial Configuration | 50