RADVision Scopia XT5000 Administrator's Manual page 93

Before you begin
If configuring from the endpoint, you must first enable advanced configuration, as described in
Maintaining the XT Endpoint Locally from the Endpoint
Procedure
1. Access the network priority settings as follows:
2. Set the Priority setting to the GLAN port that the preferred network uses. This field specifies
3. From the web interface only, select Save.
4. Access the call settings as follows:
Administrator Guide for Scopia XT5000 Endpoint with Embedded
Server for IP Office Version 3.2
• From the XT Endpoint web interface, select Administrator Settings > Networks >
Preferences > General.
• From the endpoint's main menu, select Configure > Advanced > Networks >
Preferences > General.
Figure 47: Configuring the Priority setting from the web interface
in which order the system places outgoing calls.
• From the web interface, select Administrator Settings > Calls > Preferences >
General.
• From the endpoint, select Configure > Advanced > Calls > Preferences > General.
on page 35.
Initial Configuration | 93