RADVision Scopia XT5000 Administrator's Manual page 135

Procedure
1. Access the echo cancellation settings, as follows:
2. Set the Audio delay automatic estimation field to Yes.
3. Set the Apply audio delay value field to Yes.
4. From the web interface only, select Save.
5. If necessary to further fine tune audio delay, perform these steps:
Administrator Guide for Scopia XT5000 Endpoint with Embedded
Server for IP Office Version 3.2
• From the Scopia XT Endpoint for IP Office web interface, select Administrator
Settings > I/O connections > Audio-Inputs > Echo canceller.
• From the endpoint's Main menu, select Configure > Advanced > I/O connections >
Audio-Inputs > Echo canceller.
Figure 82: Configuring echo cancellation settings
This enables the endpoint to constantly measure the audio delay.
This enables the system to fix problems with the audio delay.
a. Navigate to Audio tests as follows:
• From the endpoint's Main menu, select Configure > System Status >
Diagnostics > Audio > Tests.
• From the web interface, select Diagnostics > Audio > Tests.
Troubleshooting the Scopia XT Endpoint for IP Office | 135