Setting System Information
This page allows you to select the name of your Codec Unit. The name is displayed on the monitors
participating in the videoconference call (for example: Hong Kong, or 9th Floor Conf Rm, or NY
Office). You can also configure the fields required for setting up calls.
Procedure
Step 1
Use the Remote Control Unit keypad to type the system name. Spaces used in the name will be
automatically converted to "-".
Step 2
Use the down arrow key to scroll to the Number H.323 field. Press
number required to dial the Codec Unit.
Step 3
Use the down arrow key to navigate to the Gatekeeper fields. Enter the gatekeeper information
used by the device. Consult your network administrator for more information.
Step 4
Press
Defining IP Settings
This page allows you to setup the GLAN port fields and the IP address the system uses for placing
a call.
Consult with your network administrator to configure these fields.
RADVISION | User Guide for SCOPIA XT1000 Series Version 2.5
Figure 3-6
Setting the Codec Unit Display Name
Next to access the next screen, or press
, and enter the H.323
Close to exit the quick setup wizard.
Getting Started | 13