Administrator Guide for Scopia XT5000 Endpoint with Embedded
Server for IP Office Version 3.2
If configuring from the endpoint, you must first enable advanced configuration, as described
in
Maintaining the XT Endpoint Locally from the Endpoint
Procedure
1. Access the video settings as follows:
• From the XT Endpoint web interface, select Administrator Settings >
Calls > Preferences > Video.
• From the endpoint's main menu, select Configure > Advanced > Calls >
Preferences > Video.
Figure 94: Configuring video settings from the web interface (example)
2. Disable specific video codecs by selecting No from the lists.
Important:
The video codecs available depends on your XT Endpoint model.
3. From the web interface only, select Save.
on page 35.
Troubleshooting the Scopia XT Endpoint for IP Office | 148