Chapter 4 | Initial Configuration
After connecting the system and powering it on as described in Installation Guide for Scopia XT Endpoint for IP
Office, perform the initial configuration as described in these sections:
Navigation
•
Registering and Enabling your Scopia XT Endpoint for IP Office license
•
Performing Basic Configuration
•
Registering the XT Endpoint to IP Office
•
Configuring Video Connections
•
Configuring Audio Connections
•
Configuring Network Settings
Registering and Enabling your Scopia XT Endpoint for IP
Office license
About this task
To activate the features of your XT Endpoint, you first register the product to obtain your license key, and
then enable the license. Follow the workflow described in this section.
If you do not yet have your license key, you can set up the system in demo mode for a period of 24
hours. After this time, you must enable your license key to use the system.
Procedure
1. Register your system to activate your license key, as described in
2. Enable the license from either the endpoint or the web interface:
3. If you are enabling licenses with additional features, such as upgrading the video resolution,
Administrator Guide for Scopia XT5000 Endpoint with Embedded
Server for IP Office Version 3.2
on page 44
on page 61
on page 64
on page 73
on page 81
Endpoint for IP Office to Obtain a License Key
•
Remotely Enabling the License from the Web Interface
•
Enabling the License from the Scopia XT Endpoint for IP Office
see
Installing and Enabling Licenses which Extend System Functionality
on page 38
Registering the Scopia XT
on page 38.
on page 40
on page 43
on page 39.
Initial Configuration | 38