RADVision Scopia XT5000 Administrator's Manual page 98

Before you begin
If configuring from the endpoint, you must first enable advanced configuration, as described in
Maintaining the XT Endpoint Locally from the Endpoint
Procedure
1. Access the LDAP settings, as follows:
2. Select Add Server.
Figure 52: Adding each type of LDAP server from the web interface
Administrator Guide for Scopia XT5000 Endpoint with Embedded
Server for IP Office Version 3.2
• From the endpoint's main menu, select Configure > Advanced > System > LDAP.
• From the XT Endpoint web interface, select Administrator Settings > System >
LDAP.
Figure 51: Configuring LDAP settings from the web interface
on page 35.
Initial Configuration | 98