RADVision Scopia XT5000 Administrator's Manual page 139

Solution
Administrator Guide for Scopia XT5000 Endpoint with Embedded
Server for IP Office Version 3.2
Figure 84: Enabling the Moving setting from the web interface
2. Make sure that the Moving field is set to Yes.
3. From the web interface only, select Save.
Make sure 1080p is enabled as described below.
If configuring from the endpoint, you must first enable advanced configuration, as described
in Maintaining the XT Endpoint Locally from the Endpoint
1. Access the video settings by doing one of the following:
• From the Scopia XT Endpoint for IP Office web interface, select Administrator
Settings > Calls > Preferences > Video.
on page 35.
Troubleshooting the Scopia XT Endpoint for IP Office | 139