Managing Your Xt Endpoint Locally From The Endpoint; Accessing The Main Menu Of The Xt Endpoint - RADVision Scopia XT5000 Administrator's Manual

3. From the web interface only, select Save.
4. To upgrade the XT Endpoint, see

Managing your XT Endpoint Locally from the Endpoint

You can set up and control the Scopia XT Endpoint for IP Office from the endpoint's main menu, using
your XT Remote Control Unit.
To perform advanced configuration XT Endpoint from the endpoint itself, you must first enable advanced
configuration as described in
See the following topics for more information:
Navigation
•

Accessing the Main Menu of the XT Endpoint

•
Using the XT Remote Control Unit
•
Maintaining the XT Endpoint Locally from the Endpoint
Accessing the Main Menu of the XT Endpoint
About this task
After switching on the XT Endpoint, the main menu appears and you can do the following:
• Make audio and video calls
• View contacts in the phone book
• Start sharing content from your computer
• Adjust the camera position. You can also store the position to retrieve it later.
• Record your videoconferences (license required)
• Perform basic configuration, such as setting the interface language
• Set your preferences, such as activating the Do Not Disturb feature
• Check the system status
Administrator Guide for Scopia XT5000 Endpoint with Embedded
Server for IP Office Version 3.2
Field Name
Address This field is only relevant if you set the Enable all addresses field
to No.
Enter the IP address or IP addresses of the computers allowed to
access XT Endpoint.
Subnet Mask This field is only relevant if you set the Enable all addresses field
to No.
Enter the Subnet mask associated with the IP address or group
of IP addresses specified above.
page 123.
Maintaining the XT Endpoint Locally from the Endpoint
Description
Updating Software for Scopia XT Endpoint for IP Office
on page 29
on page 30
on page 35
Getting Started with Managing the XT Endpoint | 29
on
on page 35.