This procedure removes the current certificate by replacing it with a blank form. To back up a certificate
before deleting it from the system, see
Procedure
1. Access the XT Endpoint web interface, as described in
2. Select Administrator Settings > Utilities > Certificates.
3. Leave all fields blank and select Create to start a new CSR procedure. This erases the
Enabling the TLS Connection in XT Endpoint
About this task
This procedure describes how to enable the system to use the TLS connection, which is required to
secure communications between other video network devices and your XT Endpoint.
Before you begin
Upload the required certificates to the XT Endpoint, as described in
on page 103.
Administrator Guide for Scopia XT5000 Endpoint with Embedded
Server for IP Office Version 3.2
Interface
on page 24.
previous certificates.
Figure 60:
Backing Up and Restoring XT Endpoint Certificates
Removing Current Certificates
Securing your Scopia XT Endpoint for IP Office | 107
on page 105.
Accessing XT Endpoint Web
Uploading XT Endpoint Certificates