RADVision Scopia XT5000 Administrator's Manual page 68

6. From the web interface only, select Save.
7. Configure the settings described in
Administrator Guide for Scopia XT5000 Endpoint with Embedded
Server for IP Office Version 3.2
Table 18: Configuring advanced camera settings
Field Name
Enable Select Yes to enable this camera. Otherwise, you cannot use the
video input from this camera.
If you connected multiple cameras via the Scopia XT Camera Switch,
enable each camera.
You cannot disable the default camera.
Moving (PTZ) Enable the camera pan, tilt and zoom functionality if it is supported by
your camera, such as the XT Premium Camera. The camera must be
connected via a VISCA cable, as described in Installation Guide for
Scopia XT Series.
Disable if you connected DVD devices or non-PTZ cameras.
White balance This is not relevant for USB cameras.
mode
If the lighting in the room is not standard, you can adjust the colors of
the image sent by the camera:
• To allow the camera to automatically adjust colors to room
• To set the camera to adjust colors based on natural sunlight,
• To set the camera to adjust colors based on artificial light, select
• To calibrate colors manually, set to Manual, and adjust the Red
• To calibrate color temperature so that the image does not have
Backlight Select to counteract silhouetting of subjects when the backlighting is
compensation excessive.
Exposure This is not relevant for USB cameras.
compensation
If the lighting in the room is excessive, enable and define exposure
compensation to manually reduce light intake.
Focus mode Set the camera focus:
• To set the camera focus automatically, select Automatic.
• To adjust the camera focus manually, select Manual, and set
Camera sharpness Adjust the sharpness of the image from your camera.
68 for each camera you are using.
From the web interface only, select Save.
Description
lighting, set to Automatic.
select Outdoor. This could be used, for example, in a room with
many large windows.
Indoor.
and Blue sliders.
blue or red color undertones, set to Customize.
the distance from the camera to the table.
Table 18: Configuring advanced camera settings on page
Initial Configuration | 68