RADVision Scopia XT5000 Administrator's Manual page 94

5. Set the fields as described in
Administrator Guide for Scopia XT5000 Endpoint with Embedded
Server for IP Office Version 3.2
Figure 48: Configuring general call settings
Table 31: Configuring general call settings
Field Name
<auto>
Rate K (IP)
Audio Coding (IP)
Video Coding (IP)
DualVideoCoding (IP)
Use manual DualVideo
bandwidth (IP)
DualVideo/Live bandwidth
(IP)
Table 31: Configuring general call settings
Description
(Recommended) This is the default and setting. It indicates
that the system tries to choose the settings that best suit the
local situation.
Sets the maximum call rate that the system uses for all
incoming or outgoing calls.
Sets the preferred Audio Coding that the system tries to use
for all incoming or outgoing calls, if the remote system
supports the same Audio Coding.
Sets the preferred Video Coding that the system tries to use
for all incoming or outgoing calls, if the remote system
supports the same Video Coding.
Sets the resolution for H.264 content video.
If set to Yes allows to change bandwidth used for content and
live video (DualVideo/Live bandwidth).
Sets more bandwidth on Live Video or Content.
on page 94.
Initial Configuration | 94