RADVision Scopia XT5000 Administrator's Manual page 67

3. From the web interface only, select Save.
4. Select the port to which you connected the camera you are configuring, such as HD1:
5. Define the following camera settings:
Administrator Guide for Scopia XT5000 Endpoint with Embedded
Server for IP Office Version 3.2
Field Name
Always power on Camera Ensures the camera does not automatically power off,
Camera privacy Mode
Digital zoom
XT Camera Switch Detect
Mode
• From the endpoint's main menu, select Configure > Advanced > I/O connections >
Cameras.
• From the XT Endpoint web interface, select Administrator settings > I/O
connections > Cameras.
Figure 33: Configuring the camera settings from the web interface
Description
enabling the system to be switched on via remote control, if
the camera has an infrared receiver.
Places the camera in a sleep position, with the lens facing
down and to the left, when the system is in screen saver or
privacy mode (default).
Enables digital zoom for cameras equipped with this feature.
Enables the Scopia XT Camera Switch if you are using this
device to control and include more than one camera in your
video. Multiple cameras are typically used for larger meeting
rooms or auditoriums. For more information, see Installation
Guide for Scopia XT Endpoint for IP Office.
Initial Configuration | 67