Updating Software For Scopia Xt Endpoint For Ip Office; Configuring Remote Upgrade Settings - RADVision Scopia XT5000 Administrator's Manual

3. Define the time limit for point-to-point calls in the Call Time Limit field.

Updating Software for Scopia XT Endpoint for IP Office

This section describes how to upgrade the software running on the XT Codec Unit.
Important:
Any software version, even if it is restricted by a license, can run in a temporary mode for 24 hours.
After that, you must enter a new license key or download the previous allowed version.
The software version 3.0 does not need a license.
The software update package is an auto-extracting file containing a software version, usually with a
filename indicating the exact version number (for example: XT5000_V3_0_115.exe). You can update the
software version in one of the following ways:
•
Upgrading the Software Using a PC
from the Radvision web or FTP site.
Downloading the update package from the Radvision web or FTP site ensures you get the latest
available version.
For more information, see http://licensing.radvision.com/.
•
Upgrading the Scopia XT Endpoint for IP Office Software Using a USB Drive
the software package on the USB key that is shipped together with the product.
You need to first download the latest upgrade available to your USB.
During the software upgrade, you cannot use the XT Codec Unit to make calls or perform configurations.
All the configuration settings and user data are preserved in the update process.
Upgrading to a major version requires a new license key. The first and second digits in the version
number indicate the major version number. For example, in version 3.1.0.005, the major version number
is "3.1".
Important:
You can always downgrade the system to a previous version. Call customer support for help.
Navigation
•

Configuring Remote Upgrade Settings

•
Upgrading the Software Using a PC
•
Upgrading the Scopia XT Endpoint for IP Office Software Using a USB Drive
Administrator Guide for Scopia XT5000 Endpoint with Embedded
Server for IP Office Version 3.2
By default, the time limit is Unlimited. The maximum limit you can set is 24 hours.
By default, the time limit is Unlimited. The maximum limit you can set is 24 hours.
on page 125: Download and run a new software package
on page 123
on page 125
Maintaining the Scopia XT Endpoint for IP Office | 123
on page 127: Run
on page 127