RADVision Scopia XT5000 Administrator's Manual page 26

If configuring from the endpoint, you must first enable advanced configuration, as described in
Maintaining the XT Endpoint Locally from the Endpoint
To modify the PIN, you must be connected via HTTPS (see below).
Procedure
1. Access the remote management settings, as follows:
2. Set the fields as described in
Administrator Guide for Scopia XT5000 Endpoint with Embedded
Server for IP Office Version 3.2
• From the XT Endpoint web interface, select Administrator Settings > Utilities >
Remote Access > Web.
• From the endpoint's main menu, select Configure > Advanced > Utilities > Remote
Access > Web from the Main menu.
Figure 8: Configuring remote management on XT Endpoint
page 26.
Table 8: Configuring remote management on XT Endpoint
Field Name
Web Management Configure whether to allow remote management via the web
interface, as follows:
• Select Yes to enable remote management of the XT Endpoint
• Select No to disable remote management of the XT Endpoint
HTTPS Configure your web security settings, as follows:
• Select Yes to enable secure HTTPS connection to the web
• Select No to disable secure HTTPS connection to the web. For
on page 35.
Table 8: Configuring remote management on XT Endpoint
Description
from its web interface.
from its web interface.
when remotely managing the XT Endpoint from its web
interface.
example, if you remotely configure your endpoint only from
within your network, it may not be necessary to use HTTPS.
Getting Started with Managing the XT Endpoint | 26
on