Remotely Setting Regional Information - RADVision Scopia XT5000 Administrator's Manual

3. From the web interface only, select Save.

Remotely Setting Regional Information

About this task
You must configure the region-related settings: the country and language. You also need to configure
audio coding and video frequency, because your video network depends on the local infrastructure. The
system suggests the optimal values for audio coding and video frequency when you enter the country
value.
You may have set some of these fields in the Quick Setup procedure, since this is part of the basic
required settings (for details, see
these settings at any time from the endpoint or the web interface.
Procedure
1. Access the XT Endpoint web interface, as described in
2. Select Administrator Settings > System > Location.
Administrator Guide for Scopia XT5000 Endpoint with Embedded
Server for IP Office Version 3.2
Table 14: Configuring time zone related settings
Field Name
Time zone list
Enable daylight time
Start (dd/mm)
Stop (dd/mm)
Accessing the Quick Setup Procedure
Interface on page 24.
Figure 27: Setting the time zone
Select the time zone to which the system belongs.
Set the daylight or summer time field to Yes or No
according to the current daylight-saving status of your
time zone.
Set the day and month to indicate when daylight
saving times start.
Set the day and month to indicate when daylight
saving times end.
Accessing XT Endpoint Web
Description
on page 45). You can modify
Initial Configuration | 59