Configuring Scopia Xt Endpoint For Ip Office To Use An Ldap Directory - RADVision Scopia XT5000 Administrator's Manual

9. From the web interface only, select Save.
Configuring Scopia XT Endpoint for IP Office to use an LDAP
Directory
About this task
This procedure describes how to manage the contacts of your endpoint using any of a number of
different types of LDAP servers.
LDAP servers are accessed using the H.350 protocol, which enhances the LDAP standard to include
video endpoint information.
You can define up to 100 LDAP servers either from the endpoint itself or from the web interface. The
LDAP servers visible from the Contacts page are only those labeled as Preferred. Select one of the
preferred LDAP servers from the Server field in the contacts page to view its contacts
50: Viewing and editing contacts in Local LDAP server
You can define these types of LDAP servers:
• The local built-in LDAP server
You can define only one local LDAP server. When selected, you can edit, create or delete the
details of any contacts stored locally
on page 96). The local LDAP server has a password which can be changed if needed.
Administrator Guide for Scopia XT5000 Endpoint with Embedded
Server for IP Office Version 3.2
Field Name
Select dialing number format mode
Separator
Figure 50: Viewing and editing contacts in Local LDAP server
If your XT Codec Unit is not registered with an
H.323 gatekeeper, you can still place a call to an
endpoint registered with a gatekeeper. Check
which format of dialing the gatekeeper accepts and
configure it in this field: <gatekeeper
number><separator> <extension of the called
endpoint>, or <extension> <separator><number>.
The default syntax is
<number><separator><extension>.
Select the field separator accepted by the
gatekeeper. The default separator is ##.
on page 96).
(Figure 50: Viewing and editing contacts in Local LDAP server
Description
(Figure
Initial Configuration | 96