Resolving IP Address Problems
Problem
Possible Causes
Solution
Administrator Guide for Scopia XT5000 Series Version 3.2
2.
Make sure that the Moving field is set to Yes.
3.
From the web interface only, select Save.
Cannot configure the IP address.
If the icon for no network connection
assigned IP address, the system is not connected to network or has an invalid IP address
(for details on viewing the system's IP address, see
Customer Support
on page 144).
Make sure the GLAN cable is connected properly at both ends: to the network socket and to
the GLAN1 port of the XT Codec Unit, as shown in
Figure 100: Enabling the Moving setting
appears and the system displays 0.0.0.0 as its
Viewing System Information for
Figure 101: GLAN1 port
on page 160.
Troubleshooting the Scopia XT Series | 159