2. Set the fields as described in
3. From the web interface only, select Save.
Administrator Guide for Scopia XT5000 Endpoint with Embedded
Server for IP Office Version 3.2
Table 28: Configuring QoS settings
Field Name
Use QoS
Enable/Disable QoS. If you set Use QoS to Yes, you will provide
different priority to different data stream, or guarantee a certain level of
performance to a data stream. In particular, you may choose between
Precedence/TOS and Differentiated Service.
Quality of service Precedence/TOS - For each stream (Audio, Video, Data, Signal) sent
to the system, you may define the Type Of Services and a
Precedence to fit network capabilities. Precedence is priority. A higher
number sets a higher priority. Used mainly to class router packets as
high priority.
Differentiated Service - For each stream (Audio, Video, Data,
Signal) sent to the system, you may define a priority level to fit network
capabilities.
Figure 44: Configuring QoS settings
Table 28: Configuring QoS settings
Description
on page 89.
Initial Configuration | 89