RADVision Scopia XT5000 Administrator's Manual page 23

2. Read through and familiarize yourself with the different ways to manage your endpoint from
3. Register your license to activate the XT Endpoint, as described in
4. Configure the endpoint's basic information as described in
5. Configure the system to work with the IP Office Proxy/Registrar, as described in
6. You can prevent users from changing settings you customized for your organization by
7. You can save the optimal position before the meeting, as described in
8. Configure your camera and microphone settings, as described in:
9. (Optional) If necessary for your organization, you can secure videoconference sessions via
10. To update your software, see
Administrator Guide for Scopia XT5000 Endpoint with Embedded
Server for IP Office Version 3.2
For example, decide where to deploy the XT Endpoint, and the ports to open.
both the web interface and from the endpoint itself, as described in
Managing the XT Endpoint
your Scopia XT Endpoint for IP Office license
If you do not yet have your license key, you can set up the system in demo mode for a period
of 24 hours. After this time, you must enable your license key to use the system.
This includes, for example, performing the quick setup wizard, setting your endpoint's time
zone, and configuring the network settings.
Important:
You may have already performed some of these tasks as part of the initial setup and
configuration described in the Quick Setup Guide for the Scopia XT Endpoint for IP Office
and the Installation Guide for the Scopia XT Endpoint for IP Office.
the XT Endpoint to IP Office
videoconferences or use the full functionality of the system.
changing the default administrator PIN code (recommended). See
PIN Code for the XT Endpoint
To change the default login settings for the XT Endpoint web interface, see
Username and Password for the XT Endpoint Web Interface
Additionally, you can also set a user PIN code, which is required to access basic settings,
such as the endpoint name and time (see
Endpoint for IP Office on page 113). By default, a user PIN code is not required to access
these settings.
Call or Videoconference on page 116.
•
Configuring Video Connections
•
Configuring Audio Connections
encrypted connections and TLS certificates (see
Office on page 100).
Important:
Using encryption is subject to local regulation. In some countries it is restricted or limited
for usage. For more information, consult your local reseller.
page 123.
on page 22.
on page 38.
on page 61. If you do not register to IP Office, you cannot host
on page 112.
Setting the User PIN Code for the Scopia XT
on page 64
on page 73
Securing your Scopia XT Endpoint for IP
Updating Software for Scopia XT Endpoint for IP Office
Getting Started with Managing the XT Endpoint | 23
Getting Started with
Registering and Enabling
Initial Configuration on page 38.
Registering
Setting the Administrator
Modifying the
on page 114.
Preparing for a Video
on