RADVision Scopia XT5000 Administrator's Manual page 117

2. To save this position for future use:
3. Press ok/menu.
Administrator Guide for Scopia XT5000 Endpoint with Embedded
Server for IP Office Version 3.2
b. Move the camera position using the arrow keys, alter the zoom with the zoom keys, .
Important:
To switch to a different camera, press ok/menu on the XT Remote Control Unit and
select Video Source
a. Press ok/menu on the XT Remote Control Unit and select Presets
camera presets on page 117).
b. Press a number between 0-9 on the XT Remote Control Unit to store a position.
Important:
To delete a previously stored position, press its ID and the Delete
XT Remote Control Unit.
The number of the preset is now blue, indicating that it was successfully stored. Use the
camera position ID in the future to quickly adjust your camera.
(Figure 66: Storing camera presets
Figure 66: Storing camera presets
Figure 67: Selecting the camera position
Maintaining the Scopia XT Endpoint for IP Office | 117
on page 117).
(Figure 66: Storing
key using the