Navigation
•
Remotely Setting the System Name and Language
•
Setting Date and Time
•
Setting the Time Zone
•
Remotely Setting Regional Information
•
Configuring the Screen Saver to Start Automatically
Remotely Setting the System Name and Language
About this task
This procedure describes how to set the name and language of the endpoint from the web interface. You
can also do this as part of the quick setup from the endpoint itself, as described in
Name and Language
You can also configure the endpoint to use alternate system name, such as the SIP username, on both
the titlebar and on the monitors participating in the videoconference call, as described in
System's Name on the Titlebar
Procedure
1. Access the name and language settings:
Administrator Guide for Scopia XT5000 Endpoint with Embedded
Server for IP Office Version 3.2
on page 57
on page 58
on page 46.
on page 54.
• From the XT Endpoint web interface, select Basic Settings > Preferences > General.
• From the endpoint's main menu, select Configure > General.
on page 53
on page 59
on page 61
Setting the System
Modifying the
Initial Configuration | 53