RADVision Scopia XT5000 Administrator's Manual page 83

5. Set the fields as described in
Administrator Guide for Scopia XT5000 Endpoint with Embedded
Server for IP Office Version 3.2
Figure 41: Configuring IP addresses from the web interface
Table 25: Configuring IP addresses
Field Name
MAC Address This setting cannot be changed.
Automatic IP Set to Yes (default) if the system gets its IP address automatically.
Address
Set to No if you must set up a public IP address in the IP address
field. The other fields in this page become configurable. This is
required, for example, if the XT Endpoint is connected directly to the
Internet, without any address translation, or when other external
endpoints need to dial to this endpoint as an MCU.
To secure SIP connections using TLS certificates, your system
must have a static IP address, since the system generates the
certificate request using its IP address as the Common Name (CN).
For more information, see
Endpoint Using TLS
IP Address If the system gets its IP address automatically, indicates the IP
address assigned to the system.
Otherwise, enter the system static IP address here.
Subnet Mask If the system gets its IP address automatically, this field indicates
the subnet mask assigned to the system.
If you entered the system's IP address manually, type the subnet
mask.
Table 25: Configuring IP addresses
Description
Securing Connections to the XT
on page 100.
on page 83.
Initial Configuration | 83