Enabling The License From The Scopia Xt Endpoint For Ip Office - RADVision Scopia XT5000 Administrator's Manual

3. Enter the active license key you received when registering the product. You can also enter
4. Select Enable license.

Enabling the License from the Scopia XT Endpoint for IP Office

About this task
This procedure describes how to enable the software license of an XT Codec Unit via the endpoint's
interface.
You can also enable the license from the web interface, as described in
from the Web Interface
If you do not yet have your license key, you can set up the system in demo mode for a period of 24
hours. After this time, you must enable your license key to use the system.
Administrator Guide for Scopia XT5000 Endpoint with Embedded
Server for IP Office Version 3.2
Figure 16: Enabling the license from the web interface
Important:
The Web page shows the serial number (10-digit string) and user code. The user code
corresponds to the system MAC address. These fields are not editable.
The serial number is also printed on a label affixed at the back of the XT Codec Unit.
license keys for optional features.
The license is automatically enabled.
on page 40.
Remotely Enabling the License
Initial Configuration | 43