Head Height Adjustment - Oce CS9160 User Manual

4.3.4 Head height adjustment

When used?
Use the head height adjustment feature when printing at high speeds or when using strongly curved media.
This way you prevent the print head from touching the media.
Notes
•
If the head height adjustment lever is raised, high print quality will not be guaranteed.
• Do not open the front cover nor change the head height during printing. If the head height is
changed, the head alignment will be changed and high print quality will no longer be
guaranteed.
•
To perform a head alignment, refer to "Head height alignment"
Procedure:
Step 1 : Open the front cover.
Step 2 : Move the head height adjustment lever (orange) to change the head height.
Notes
•
Do not raise the head height adjustment lever higher than the following position to avoid printer
damage.
The high lamp on the operation panel lights up in green
Step 3 : Close the front cover
N°
1 Front cover
High
1
N°
1 Head height adjustment lever
User's Guide Océ CS9160 printer
Name
Name
55 AP-40790 – Rev 2.0 -23/08/2011,
1