Custom Adjustment Pattern - Oce CS9360 User Manual

3.4.2

Custom Adjustment Pattern

All patterns from A to F can be adjusted.
By performing this adjustment, all print modes will be adjusted.
This menu is made up with the following menus.
Menu Name
Custom Confirmation Pattern
Custom Rough Adjustment Pattern
Custom Micro Adj. PatternALL
Adjustment
Pattern
Each Adjust
Patterns
Step 1:
Print the confirmation pattern and check the amount of misalignment.
3.6.2.1 Custom Confirmation Pattern
Step 2:
Perform rough adjustment when the misalignment is big.
3.6.2.2 Custom Rough Adjustment Pattern
Perform micro adjustment when the misalignment is small.
3.6.2.3 Custom Micro Adjustment Pattern
NOTE
Perform rough adjustment first when the amount of misalignment cannot be judged.

Step 3:
Print the confirmation pattern and check if the printer is adjusted properly.
3.6.2.1 Custom Confirmation Pattern
Step 4:
If the printer is not adjusted, go back to Step 2.
NOTE
When you are not satisfied with the result of rough adjustment, perform micro

adjustment.
For Micro Adjustment Pattern, select "Adjust pattern ALL" to adjust all patterns or "Each

Adjust pattern" to adjust patterns A to F separately.
3.6.2.3.1 Adj. PatternALL
3.6.2.3.2 Each Adjust Patterns
Description
Print the confirmation patterns A to F and
check the amount of misalignment.
Perform this adjustment when the
misalignment is big.Adjust all
confirmation patterns A to F.
Perform this adjustment when the
misalignment is small.Adjust all
confirmation patterns A to F.
Perform this adjustment when the
misalignment is small.Adjust all
confirmation patterns A to F.
3-54
CS9360 User's Guide
Reference
3.6.2.1 Custom Confirmation Pattern
3.6.2.2 Custom Rough Adjustment
Pattern
3.6.2.3.1 Adj. PatternALL
3.6.2.3.2 Each Adjust Patterns