Custom Adjustment Pattern - Oce Eco Solvent CS9350 Manual

CS9350 User's Guide
NOTE
When you press the [Cancel] key, the input operation is not executed and "Adj.3: Fine

Pattern" is displayed on the operation panel.
Step 7:
Press the [Enter] key on the operation panel.
• The value is set in the "Pattern: *" (* indicates a number from 1 to 7).
• The operation panel display returns to "Adj.3: Fine Pattern".
3.4.2

Custom Adjustment Pattern

All patterns from A to F can be adjusted.
By performing this adjustment, all print modes will be adjusted.
This menu is made up with the following menus.
Menu Name
Custom Confirmation Pattern
Custom Rough Adjustment Pattern
Custom Micro Adj. PatternALL
Adjustment
Pattern
Each Adjust
Patterns
Step 1: Print the confirmation pattern and check the amount of misalignment.
3.6.2.1 Custom Confirmation Pattern
Step 2:
Perform rough adjustment when the misalignment is big.
3.6.2.2 Custom Rough Adjustment Pattern
Perform micro adjustment when the misalignment is small.
3.6.2.3 Custom Micro Adjustment Pattern
Description
Print the confirmation patterns A to F and
check the amount of misalignment.
Perform this adjustment when the
misalignment is big.Adjust all
confirmation patterns A to F.
Perform this adjustment when the
misalignment is small.Adjust all
confirmation patterns A to F.
Perform this adjustment when the
misalignment is small.Adjust all
confirmation patterns A to F.
3-53
Reference
3.6.2.1 Custom Confirmation Pattern
3.6.2.2 Custom Rough Adjustment
Pattern
3.6.2.3.1 Adj. PatternALL
3.6.2.3.2 Each Adjust Patterns