Adjust Print; Standard Adjust Print - Oce CS9360 User Manual

3.4

Adjust Print

It is used for optimizing the quality of image prints (micro alignment).
This printer has the following adjustment methods.
Adjustment
method
Standard Adjusts only the print mode in the user type setting which is
currently set.
Custom Adjusts all print modes.
NOTE
This printer was adjusted at the factory shipment so that it obtains the optimum printing

quality. Adjust the quality if the print quality changes after the installation environment or
the media is changed.
If you change the user type settings after performing Standard Adjust Print, make sure to

perform Adjust Print.
When performing Custom adjust print, the print modes are adjusted all at once. Therefore,

you do not need to perform print adjustment even when the user type setting has been
newly set or changed.
When using RIP software, etc, and setting the resolution which is different from the

setting in the user type setting, make sure to perform adjustment for all print modes by
Custom Adjust Print.
3.4.1

Standard Adjust Print

Adjusts only the print mode in the user type setting which is currently set.
This menu is made up with the following menus.
Menu Name
Standard Confirmation
Pattern
Standard Rough
Adjustment Pattern
Standard Micro
Adjustment Pattern
Step 1:
Print the confirmation pattern and check the amount of misalignment.
3.6.1.1 Standard Confirmation Pattern
Step 2:
Perform rough adjustment when the misalignment is big.
3.6.1.2 Standard Rough Adjustment Pattern
Perform micro adjustment when the misalignment is small.
3.6.1.3 Standard Micro Adjustment Pattern
Description
Description
Print the confirmation pattern and check the amount
of misalignment.
Perform this adjustment when the misalignment is
big.
Perform this adjustment when the misalignment is
small.
Pattern
Pattern
Pattern
3-44
CS9360 User's Guide
Reference
3.6.1 Standard Adjust Print
3.6.2 Custom Adjustment Pattern
Reference
3.6.1.1 Standard Confirmation
3.6.1.2 Standard Rough Adjustment
3.6.1.3 Standard Micro Adjustment