Sub Fuel Level Sensor Inspection; Specifications; Tightening Torque Specifications - Suzuki GRAND VITARA Owner's Manual

1G-22 Fuel System:
Removal
1) Remove fuel tank from vehicle Referring to "Fuel
Tank Removal and Installation: "
2) Disconnect sub fuel level sensor connector (1).
3) Remove sub fuel level sensor (2).

Tightening Torque Specifications

Fastening part
Fuel delivery pipe bolt
Fuel pressure regulator bolt
Fuel tank bolt
Fuel filler hose clamp
Fuel pump assembly bolt
NOTE
The specified tightening torque is also described in the following.
"Fuel System Components: "
"Fuel Hose Disconnecting and Reconnecting: "
Reference:
For the tightening torque of fastener not specified in this section, refer to "Fastener Information: in Section 0A".
1
2
2
I5JB0A171029-01

Specifications

Installation
Reverse removal procedure for installation noting the
following.
• Replace O-ring with new one using care not to
damage it.
• Apply thin coat of fuel to O-ring, and then install sub
fuel level sensor.

Sub Fuel Level Sensor Inspection

• Check sub fuel level sensor for damage.
• For inspection of sub fuel sensor (1), refer to "Fuel
Level Sensor Inspection: in Section 9C"
Tightening torque
N⋅m kgf-m
25 2.5
11 1.1
50 5.0
2 0.2
11 1.1
S5JB0A1706027
1
I5JB0A171030-01
S5JB0A1707001
Note
lb-ft
18.0
8.0
36.5
1.5
8.0