Epson S1D13506 Technical Manual page 472

Page 12
ENABLE_CLOCK_CHIP
ENABLE_ANTIALIASED_FONTS
EpsonMessages
DEBUG_MONITOR
MonoPanel
TEST_BITMAP
S1D13506
X25B-E-001-06
This option is used to enable support for the ICD2061A clock generator. This clock chip is
used on the S5U13506B00C evaluation board. The S1D13506 display drivers can program
the clock chip to support the frequencies required in the MODE tables.
If you are not using the S5U13506B00C evaluation adapter, you should disable this option.
This option enables the display driver support of antialiased fonts in WinCE. Fonts created
with the ANTIALIASED_QUALITY attribute will be drawn with font smoothing.
If you want all fonts to be antialiased by default, add the following line to
PLATFORM.REG: [HKEY_LOCAL_MACHINE\SYSTEM\GDI\Fontsmoothing]. This
registry option causes WinCE to draw all fonts with smoothing.
This option is only applicable to 16bpp mode.
This debugging option enables the display of EPSON-specific debug messages. These
debug message are sent to the serial debugging port. This option should be disabled unless
you are debugging the display driver, as they will significantly impact the performance of
the display driver.
This option enables the use of the debug monitor. The debug monitor can be invoked when
the display driver is first loaded and can be used to view registers, and perform a few
debugging tasks. The debug monitor is still under development and is untested.
This option should remain disabled unless you are performing specific debugging tasks that
require the debug monitor.
This option is intended for the support of monochrome panels only.
The option causes palette colors to be grayscaled for correct display on a mono panel. For
use with color panels this option should not be enabled.
This option allows the debug monitor to display a test bitmap. This bitmap is big and will
make the display driver considerably larger. The flag DEBUG_MONITOR must also be
enabled for this option to work.
Epson Research and Development
Vancouver Design Center
Windows® CE 2.x Display Drivers
Issue Date: 01/05/31