Epson S1D13506 Technical Manual page 426

Page 8
Comments
S1D13506
X25B-B-002-03
• If 13506SHOW is started without defining the color depth, the program automatically
cycles through the available color depths from highest to lowest. The first color depth
shown is the default color depth value saved to 13506SHOW using 13506CFG. This
approach avoids showing color depths not supported by a given hardware configuration.
• 13506SHOW checks if the display(s) selected from the DS= option have been previ-
ously configured by 13506CFG. If these display(s) have not been configured,
13506SHOW displays an error message. For example, if the system is configured for the
CRT, an error is displayed if the user selects the TV with the DS= option.
• If the DS= option is used to combine two displays of different resolutions into the same
surface, the program will display an error message.
• 13506SHOW cannot show a greater color depth than the display allows.
• SwivelView™ (/r90, /r270) is available only for color depths of 8, 15, and 16 bpp.
• SwivelView™ (/r180) is available for color depths of 4, 8, 15, and 16 bpp.
• If the "bl=" or "bc=" options are not used, 13506SHOW will cycle through all available
color depths.
Epson Research and Development
Vancouver Design Center
13506SHOW Demonstration Program
Issue Date: 01/02/06