Epson S1D13506 Technical Manual page 435

Epson Research and Development
Vancouver Design Center
Note
Note
13506PLAY Diagnostic Utility
Issue Date: 01/02/06
IC {LCD|CRT|TV}
Initializes the Hardware Cursor for a given display type.
Where:
LCD
CRT
TV
II {LCD|CRT|TV}
Initializes the Ink Layer for a given display type.
Where:
LCD
CRT
TV
L {LCD|CRT|TV} index [red green blue]
Writes red, green, and blue Look-Up Table (LUT) components for a given display type. If
the red, green, and blue components are not specified, reads the components at the given
index.
Where:
LCD
CRT
TV
index
red
green
blue
Only bits 7-4 of each color are used in the LUT. For example, 10h is the first color in-
tensity after 00h. Valid LUT colors follow the pattern 00h, 10h, 20h, 30h,...E0h, F0h.
LA {LCD|CRT|TV}
Reads all LUT values for a given display.
Where:
LCD
CRT
TV
Only bits 7-4 of each color are used in the LUT. For example, 10h is the first color in-
tensity after 00h. Valid LUT colors follow the pattern 00h, 10h, 20h, 30h,...E0h, F0h.
Initializes for the LCD display.
Initializes for the CRT display.
Initializes for the TV display.
Initializes for the LCD display.
Initializes for the CRT display.
Initializes for the TV display.
LUT used by the LCD display.
LUT used by the CRT display.
LUT used by the TV display.
Index into the LUT (hex).
Red component of the LUT (hex).
Green component of the LUT (hex).
Blue component of the LUT (hex).
Reads LUT values for LCD display.
Reads LUT values for CRT display.
Reads LUT values for TV display.
Page 7
S1D13506
X25B-B-003-02