Epson S1D13506 Technical Manual page 442

Page 14
S1D13506
X25B-B-003-02
ERROR: Not enough display buffer memory for LCD/CRT/TV cursor/ink layer.
There was insufficient display buffer memory for the given Hardware Cursor/Ink Layer configu-
ration. Memory requirements depend on:
• the display resolution(s).
• the bit-per-pixel depth(s).
• whether a half-frame buffer is required.
• the number of displays active (LCD or LCD and CRT/TV).
WARNING: FEATCLK cannot be multiplexed to CLKI. Clock synthesizer programmed
instead.
In 13506PLAY, the CLKI command was used to select the FEATCLK frequency. Since the
FEATCLK can only be multiplexed to CLKI2, the clock synthesizer is programmed instead.
Epson Research and Development
Vancouver Design Center
13506PLAY Diagnostic Utility
Issue Date: 01/02/06