Epson S1D13506 Technical Manual page 428

Color lcd/crt/tv controller
Table of Contents

Advertisement

Page 10
S1D13506
X25B-B-002-03
ERROR: Not enough memory for LCD/CRT/TV in 4/8/16 bits-per-pixel.
13506SHOW is unable to change the color depth due to insufficient display buffer memory.
Memory requirements depend on:
• the display resolution(s).
• the bit-per-pixel depth(s).
• whether a half-frame buffer is required.
• the number of displays active (LCD or LCD and CRT/TV).
ERROR: PCI bridge adapter not found.
The Windows PCI driver did not find the PCI Bridge Adapter.
ERROR: PCI driver not found.
The Windows PCI driver is not loaded.
ERROR: Program not configured for LCD/CRT/TV. Run 13506CFG and configure for
LCD/CRT/TV.
The program was configured by 13506CFG for a display device that is not available. This typically
occurs if the wrong command line was entered for the current configuration.
WARNING: CLKI frequency not in HAL table. Program assumes that external oscillator is
used.
WARNING: CLKI2 frequency not in HAL table. Program assumes that external oscillator is
used.
The correct frequency was not found in the HAL table used to program the clock synthesizer. An
external oscillator may be in use. This warning message will not stop the program.
WARNING: CRT/TV only available in LANDSCAPE mode.
SwivelView™ is only available on LCD only configurations.
ERROR: b= option cannot be used with /noinit.
The command line options b= and /noinit are contradictory, since b= instructs the program to change
the color depth and /noinit indicates that no register changes are to be made.
ERROR: Continual screen read will not work with the /a switch.
ERROR: Continual screen write will not work with the /a switch.
The /a switch automatically cycles through the different color depths, whereas the continual screen
read/write goes into an infinite loop to read/write memory.
ERROR: Do not select 4 BPP LCD in SwivelView
SwivelView
90 and SwivelView
90 or SwivelView
270 are available only in 8 and 16 bits-per-pixel modes.
Epson Research and Development
Vancouver Design Center
270 degrees.
13506SHOW Demonstration Program
Issue Date: 01/02/06

Advertisement

Table of Contents
loading

Table of Contents