Epson S1D13506 Technical Manual page 348

Page 114
void seDisplayEnable(BOOL Enable)
void seLcdDisplayEnable(BOOL Enable)
void seCrtDisplayEnable(BOOL Enable)
void seTvDisplayEnable(BOOL Enable)
Description:
Parameters:
Return Value:
S1D13506
X25B-G-003-04
These functions enable or disable the selected display device.
seDisplayEnable() enables or disables the display for the active surface.
seLcdDisplayEnable() enables or disables the LCD display.
seCrtDisplayEnable() enables or disables the CRT display. seCrtDisplayEnable() will dis-
able CRT/TV PCLK 2X clock and as a side effect will disable TV, if the TV was enabled.
seTvDisplayEnable() enables or disables the TV display. If the CRT is enabled then seT-
vDisplayEnable() disables it. When seTvDisplayEnable is called the TV flicker filter is
enabled or disabled based on the values saved by the configuration program.
Enable Call with Enable set to TRUE to enable the display device. Call with
Enable set to FALSE to disable the device.
None.
Epson Research and Development
Vancouver Design Center
Programming Notes and Examples
Issue Date: 02/03/21